Design Your Own 6502 Board

I created all the 65xx components from scratch, and I suppose you could too. However, the library isn't necessary if you have a DIY6502 design file. All the components can be cut and pasted, even pasted twice if you need an extra 6522 for example.

Here's how:
• use GROUP to place a box around the 65xx part.
  
• use CUT to grab the symbol to the clipboard.
  
• use PASTE to put the symbol onto the schematic again, or open a new schematic and then PASTE it into your own design.
  
• When you have all your parts on the new schematic, use BOARD to generate your own board.